Memorex MD6888 - Manual (Page 15)

14
CD OPERATION (CONTINUED)
With a CD inserted, press the
PLAY/PAUSE (
)/POWER ON
button ❶ to turn the unit on and press
the STOP (■)/POWER OFF button ❷ to
stop auto playback. Press the PROG
button ❸ ; the PROG indicator will
appear in the CD display.
2
1
3
1
Select the first track to be played back
using the
SKIP/SEARCH ❶ or
button ❷ , then press the PROG button
❸ again. Repeat this step to program
additional tracks up to a maximum of
24 tracks.
2 1
3
2
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Press the PLAY/PAUSE ( )
/POWER ON button ❶ to begin
Programmed playback and adjust the
VOLUME control ❷ and DBBS switch
❸
as desired.
2
1
3
3
To skip forward or backward through
the programs, press the
SKIP/SEARCH
❶ or button
❷ . When the disc is through playing, it
will stop.
2 1
4
NOTES:
•
Press the STOP (■)/POWER OFF button to stop the disc before it is finished.
• As each program is played, the track number is shown in the display.
• To clear the memorized program: press the STOP (■)/POWER OFF button
again while in the stop mode, wait approximately 60 seconds and the unit will turn
off or open the CD compartment.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
MD6888.O/M.QXD 4/29/03 9:00 AM Page 14