Metrologic Instruments SP5700 Series - Manual (Page 36)

Version 2.0
OptimusPDA SP5700 Series User Manual
Copyright © 2007 29 March 2007
Metrologic, Inc.
36
Specifying an IP address is covered separately under “Static IP”
• Static IP
• Under the IP Address tab, select the Specify an IP address radio button. Enter the
IP Address, Subnet Mask and Default Gateway data.
• Select the Name Servers tab, and enter the required data. You will need to consult
the network manager for specific server address information.
Picture 39 IP address and server address assignment