Motorola T4900 - Manual (Page 23)

Aler
ts
22
Transmitting a Talk Confirmation Tone
You can set your radio to transmit an unique tone when you finish transmitting.
It's like saying Roger or Over to let others know you are finished talking.
• To turn talk confirmation on, press and hold while you turn the radio on. When
you release after transmitting, your call tone transmits and displays.
• To turn talk confirmation off, turn your radio off and then back on while pressing
and holding .
To transmit to a radio that has QT noise filtering turned on:
1. Select the same channel and Interference Eliminator Code as the other radio.
2. Press to send a call tone. This allows your voice to pass through the QT noise
filter on the receiving radio.
3. Press and speak normally.
Note: If you skip step 2, the beginning of your message may not be heard on the
receiving radio.
For a 30-second period, starting after the last transmission, all transmissions
received on the selected channel and code will pass through the QT noise
filter.