Mr Handsfree Blue Butterfly II - Manual (Page 5)

English
3
PAIRING THE HEADSET
You are required to pair the Blue Butterfly headset with your mobile phone once before using it.
Each Blue Butterfly headset has a default PIN-code 0000 for pairing, which is stored in its internal memory. You
are usually required to enter the PIN-code 0000 in a pairing process with a Bluetooth mobile phone or other
devices; however it depends on the kind of Bluetooth device that the headset is connected to.
The Blue Butterfly headset must be turned off before initiating pairing. Press and hold the MF-button (3) until
the blue indicator (4) lights up constantly. The headset is now ready for pairing. Initiate the pairing process
on your Bluetooth mobile phone to pair with the Blue Butterfly headset. (Refer to the manual of your mobile
phone.)
Select Blue B-II out of the list with found devices on your mobile phone. You will be asked to enter
the PIN-code to complete pairing, enter 0000 and confirm it. When the pairing has been successful, the blue
indicator (4) of the headset will flash 10 times quickly.
Note:
1.
If the Blue Butterfly headset is not in pairing mode, your mobile phone won’t find the headset. Please set
the headset into pairing mode before letting your mobile phone search for the headset.
2. If no pairing is possible for a period of time (approx. two minutes), the headset will automatically leave
pairing mode. You may need to start all over again.
3. The Blue Butterfly headset can pair up to 8 devices. The different devices are stored in a list in the
internal memory of the headset.
a.
If you wish to pair more than 8 devices, the less recent paired device will be automatically deleted
from the list.
b . All devices (max.8) that are on this list, can be connected to the headset.
c. When turning on the headset, it will automatically connect to the device it was last connected with.
If you want to connect the headset with another device of this list, you have to start the procedure
from this device. This device then becomes the last connected device on the list.
4. Paired devices remain paired even when:
• One of the devices is not turned on.
• A service connection is interrupted or the service stopped.
• One or both devices are rebooted.
MAKING AND ANSWERING / ENDING CALLS
Once the Blue Butterfly headset is successfully paired with your mobile phone, you can use it to make and
receive calls. The Blue Butterfly headset can be used with voice dialing if your mobile phone supports this
feature. (Please check the manual of your mobile phone).
MAKING CALLS
Using voice dialing:
Press the MF-button (3), wait for a beep and say the name of the person you want to call. Press the MF-button
(3) again to cancel voice dialing.
Using the phone keys to make a call:
Enter and dial the number on the mobile phone as you normally do. Once the call has been set up, the
sound will be transmitted to your headset automatically.
m_blue_gb.pmd 08.09.2005, 16:36 3