Motorola LS1203 - Manual (Page 95)

USB Interface 7 - 3
To set up the scanner:
1. Attach the modular connector of the USB interface cable to the cable interface port on the scanner (see
Installing the Interface Cable on page 1-2 ).
2. Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port of
the IBM SurePOS terminal.
3. Select the USB device type by scanning the appropriate bar code from USB Device Type on page 7-4 .
4. On first installation when using Windows, the software prompts to select or install the Human Interface Device
driver. To install this driver, provided by Windows, click Next through all the choices and click Finished on the
last choice. The scanner powers up during this installation.
5. To modify any other parameter options, scan the appropriate bar codes in this chapter.
If problems occur with the system, see Troubleshooting on page 3-2 .
USB Parameter Defaults
Table 7-1 lists the defaults for USB host parameters. If any option needs to be changed, scan the appropriate bar
code(s) provided in the Parameter Descriptions section beginning on page 7-4 .
NOTE See Appendix A, Standard Defaults for all user preferences, hosts, symbologies, and miscellaneous
default parameters.
Table 7-1 USB Defaults
Parameter Default Page Number
USB Host Parameters
USB Device Type HID Keyboard Emulation 7-4
USB Country Keyboard Types (Country Codes) North American 7-5
USB Keystroke Delay No Delay 7-7
USB CAPS Lock Override Disable 7-7
USB Ignore Unknown Characters Send 7-8
Emulate Keypad Disable 7-8
USB FN1 Substitution Disable 7-9
Function Key Mapping Disable 7-9
Simulated Caps Lock Disable 7-10
Convert Case No Case Conversion 7-10