MACKIE QUAD EQ - Manual (Page 22)

22
QUAD EQ
Quad EQ
23
Owner’s Manual
Owner’
s Manual
OPERATION Step 1 Step 2 Step 3
Change a
Filter’s EQ
Level Press a Filter
Select button
(blinks) Rotate KNOB to
adjust the
dB level
Group
Filter Select
(method 1) Hold a Filter
Select button Press multiple
Filter buttons,
then let go of first Rotate KNOB
to adjust level
of this group
Group
Filter Select
(method 2) Hold a Filter
Select button Rotate KNOB to
select a band,
then let go of first Rotate KNOB
to adjust level
of this group
Set a Filter to
0 dB Hold EDIT Press Filter
Select button
Set all
Filters to 0 dB Hold EDIT Press MASTER
Select button
Filter EQ Operations
OPERATION Step 1 Step 2 Step 3
Engage NOISE Hold Channel
A, B, C or D Press NOISE Listen to noise
Use RTA to see
Adjust NOISE Press EDIT Press NOISE Rotate KNOB
NOISE Operations
OPERATION Step 1 Step 2 Notes
Select a
Channel Press Channel
A, B, C or D
Stereo Link
A and B Hold Channel A
and B Repeat to
unlink
Stereo Link
C and D Hold Channel C
and D Repeat to
unlink
Lock a Chan-
nel Hold EDIT Press Channel A,
B, C or D Blinking when
locked
Unlock a
Channel Hold EDIT Press Channel
Select A, B, C
or D Light solid
when not
locked
Bypass a
Channel Press BYPASS Press again to
un-bypass
Channel Operations
OPERATION Step 1 Step 2 Step 3
Engage FILTER Press FILTER
Adjust FILTER
HP Frequency
Press EDIT Press FILTER Rotate KNOB
to adjust HPF
Adjust FILTER
LP Frequency Press FILTER
again Rotate KNOB
to adjust LPF
Change FILTER
HP Slope Press FILTER
again Rotate KNOB
choose slope
Change FILTER
LP Slope Press FILTER
again Rotate KNOB
choose slope
FILTER Operations (high or low-pass)
OPERATION Step 1 Step 2 Step 3
Engage RTA Press RTA
Adjust RTA
Level Press EDIT
(blinks) Press RTA Rotate KNOB
to adjust level
Adjust RTA
Decay settings Press RTA
x2 Rotate KNOB
4 options:
OFF, On1,
On2 and On3
Adjust RTA to
be Pre or Post
EQ Press RTA
x3 Rotate KNOB
2 options:
Post or Pre
Turn off EQ dis-
play and show
RTA only Press RTA
x4 Rotate KNOB
2 options:
On or Off
RTA Operations
OPERATION Step 1 Step 2 Step 3
Engage MIC Press MIC See SPL
Adjust MIC
Level to view Press EDIT
(blinks) Press MIC Rotate KNOB
to adjust level
Choose SPL
Noise Weight-
ing Press MIC
x2 Rotate KNOB
3 options:
A, B or C
weighting
MIC Operations
OPERATION Step 1 Step 2 Step 3
Store current
settings as a
snapshot Rotate KNOB to
find a suitable
number Hold STORE for
two seconds
Recall a snap-
shot to become
the current
settings Rotate KNOB to
find the number
of a previous
snapshot Press RECALL
ERASE all
snapshots Hold STORE
and RECALL
during power up
See if a snap-
shot is saved in
a location Rotate KNOB RECALL will
light if a snap-
shot has been
saved
Apply a snap-
shot from one
channel to
another Change channel
by pressing a
Channel button
A, B, C or D Rotate KNOB to
find the number
of a previous
snapshot Press
RECALL
STORE and RECALL Operations
Controls quick guide
(copy this page onto a white tee-shirt)
The RTA, MIC, NOISE, and FILTER buttons have two
modes of operation:
1. Pressing these buttons will toggle them on or
off. Hold A, B, C, or D and NOISE to play noise.
2. Pressing EDIT and then any of these four func-
tions will allow deeper access to the settings of
these functions, and both the function button
and EDIT will blink.
3. To quit the EDIT mode, press EDIT again, or
press the KNOB inwards.