Mermaid Technology 150 - Manual (Page 15)

mermaid ventura 150 TFT x4 - User manual Version 1.1
P/N: 20-1700-00456 Page 15 of 24
9. Troubleshooting
If you have troubles using this monitor, please refer to following suggestions for troubleshooting.
If you can not rectify the problem yourself, please contact your distributor or place of purchase.
Symptom Suggestions
Screen is blank Ensure that the power cord is connected and
the monitor is on.
“Check signal cable” message Ensure that the signal cable is connected firmly
to the signal source. Ensure that the signal source is turned on.
“Sync out of range” message Check the maximum resolution and the
frequency of the video adapter.
The image is too dark or bright Adjust the brightness and contrast.
Horizontal bars appear to flicker, jitter or
shimmer on the image
Adjust the “Phase”.
Vertical bars appear to flicker, jitter
or shimmer on the image
Select “Auto Adjust” in OSD menu
Screen is blank The system activates power management mode. Just press the PC
keyboard or move the PC mouse
Image is not stable and may appear to vibrate Check the display resolution and frequency from your
PC or video board is within the available range of your monitor.
On your PC, check “Control Panel -> Display >Settings”.
If the setting is incorrect, you may change the setting using PC utility
program.
Image is not centered on the screen Adjust the “Image Position / H-Position or V-Position”.