Memorex MMP8550 - Manual (Page 20)

19
OPERATION (CONTINUED)
1 1
1
TO LISTEN TO MP3s/WMAs/WAVs
Press the PLAY/PAUSE ®p button to start
playback. If the Function switch is set to MIX, the
unit will randomly play the files on the player. If the
Function switch is set to the ON position, the unit
will start playback on the first file OR on the last file
played before it was turned off.
2
Press the VOLUME +/- buttons to increase or
decrease the volume.
3
To stop playback and turn the unit off, slide the
Function switch to the OFF position.
NOTE:
• See pages 7 through 16 for information on
uploading MP3, WMA and WAV files to this unit.
1 1
4
Turn the unit on by sliding the Function switch
to the ON position; the LED indicator will light
green for a few seconds, then it will blink green
and the unit will be in the Pause mode. If you
want to playback the music files randomly,
slide the Function switch to the MIX (Random)
position.
NOTES:
• (AUTO RESUME): Each time you turn off the unit, when the unit is turned back on, this unit will
resume at the beginning of the last track which was playing before turning off.
• (AUTO POWER OFF): When all the music files have been played, the unit will pause playback and
the LED (Function) indicator will flash green. After two minutes, the unit will turn off automatically and
the LED (Function) indicator will turn off. To turn on the unit again, slide the Function switch to the OFF
position and wait for a few seconds. Then slide the Function switch to the ON or MIX position; the
LED (Function) indicator will flash green again.