MartinLogan Ascent LoudSpeaker - Manual (Page 23)

The Ascent hybrid speaker system consists of a broad-range single
element electrostatic transducer integrated with a quick-
response woofer. This approach takes advantage of the benefits
that both technologies have to offer. Dispersion is a controlled
30 degrees. This was achieved by curving the electrostatic
transducer element itself, an elegantly simple solution.
System Frequency Response
35–22,000 Hz ± 3db
Dispersion
Horizontal: 30 Degrees
Vertical: 4’ (122 cm) Line Source
Sensitivity
90 dB/2.83 volts/meter
Impedance
Nominal: 4 ohms
Minimum: 1.2 ohms @ 20 kHz
Crossover Frequency
280 Hz
Components
Custom-wound audio transformer, air core coils,
polypropylene capacitors
Woofer Type
10" (25 cm) high excursion, high rigidity cone with extended
throw driver assembly, non-resonance chamber format
Bass Control Switch
-3 dB below 200 Hz
Power Handling
200 watts per channel
Recommended Amplifier Power
80–200 watts per channel
Weight
72 lbs. each (32.5kg)
Size
13” W × 22” D × 64” H
(33 W × 55.9 D × 162.6 H cm)
Your Ascent speakers are provided with an automatic Limited
90 Day Warranty coverage.
You have the option, at no additional charge, to receive a
Limited 5 Year Warranty coverage. To obtain the Limited
5 Year Warranty coverage you need to complete and return
the Certificate of Registration, included with your speakers,
and provide a copy of your dealer receipt, to MartinLogan
within 30 days of purchase.
MartinLogan may not honor warranty service claims unless
we have a completed Warranty Registration card on file!
If you did not receive a Certificate of Registration with
your new Ascent speakers you cannot be assured of having
received new units. If this is the case, please contact your
authorized MartinLogan dealer.
Service
Should you be using your MartinLogan product in a country
other than the one in which it was originally purchased,
we ask that you note the following:
1. The appointed MartinLogan distributor for any given
country is responsible for warranty servicing only on
units distributed by or through it in that country in
accordance with its applicable warranty.
2. Should a MartinLogan product require servicing in a
country other than the one in which it was originally
purchased, the end user may seek to have repairs performed
by the nearest MartinLogan distributor, subject to that
distributor’s local servicing policies, but all cost of
repairs (parts, labor, transportation) must be born by
the owner of the MartinLogan product.
3. If, after owning your speakers for six months, you
relocate to a country other than the one in which
you purchased your speakers, your warranty may be
transferable. Contact MartinLogan for details.
General Information 23
G
ENERAL
I
NFORMATION
Warranty and Registration Specifications