Miller Electric XMT 304 CC/CV - Manual (Page 27)

OM-233 045 Page 23
5-2. Meter Functions
.
The meters display the actual weld output values for approximately three seconds after the arc is broken.
Mode Meter Reading At Idle
Scratch Start TIG (GTAW)
Actual Volts (OCV) Preset Amps
V A
80.0 85
Lift-Arc Trigger
Hold TIG (GTAW)
V A
Blank Preset Amps
85
TIG (GTAW)
Blank Preset Amps
V A
85
MIG (GMAW)
Preset Volts Blank
V A
24.5
Pulsed MIG
(GMAW-P)
Pulse Display Pulse Display
V A
PPP PPP
Remote
Control SMAW
Blank Preset Amps
V A
85
Panel Control
SMAW
Actual Volts (OCV) Preset Amps
V A
80.0 85
Voltage-Sensing
Wirefeeder
Flashes (OCV) And Preset Blank
V A
80.0