Mercury 8 - Manual (Page 18)

Mercury 8/16 User’s Manual
16
“SYSTEM 01”, SYSTEM 02”,…,”SYSTEM 16” and 8 port KVM switch is
from “SYSTEM 01”, “SYSTEM 02”,…,”SYSTEM 08”. Besides, the sun
symbol “☼“near to the PC name represent s the PC system is powered on.
To use up arrow key “©” or down arrow key “ª” to select port for destination PC
name. After you have selected the PC port already, you can press the ENTER key to
switch the PC port you want immediately.
To use “ PgUp” key or “PgDn” key for selected previous or next Bank number.(or Box
number)
Figure 6-2. On Screen Display
To press “INS” key for editing PC name. After finishing the edit, please press
“ENTER” key for saving information.
To use “TAB” key to select items like Bank, OSD, SCAN, CHANGE PASSWORD,
CONSOLE ON /OFF, etc…
Figure 6-3. On Screen Display
a. The “OSD: 10 SEC.” means that the PC system name exists 10 seconds on
your monitor. You can modify it from 5 seconds to 99 seconds. The factory
default value is 10 seconds.
b. The “SCAN: 10 SEC.” means that scan interval from one PC port to next PC
port. The default SCAN time is 10 seconds and the maximum scan time is
99 seconds.
c. The “CHANGE PASSWORD” is for user to avoid all PC systems to be
intruded by the other person. The default password is 8 digits “00000000 “.
01 SYSTEM 01 02 ☼SYSTEM 02
BANK : 1
15 ☼ SYSTEM 15 16 SYSTEM 16
OSD : 10 SEC. CHANGE PASSWORD
SCAN : 10 SEC. CONSOLE ON /OFF
ESC : QUIT ENTER : COMPLETE
TAB : NEXT INSERT : EDIT