MicroNet Technology SP3367A - Manual (Page 2)

1
CE Declaration of conformity
This equipment complies with the requirements relating to electromagnetic
compatibility, EN55022 class A for ITE, the essential protection
requirement of Council Directive 89/336/EEC on the approximation of the
laws of the Member States relating to electromagnetic compatibility.
FCC Part 68
This equipment complies with Part 68 of the FCC Rules. On the bottom of
this equipment is a label that contains the FCC Registration Number and
Ringer Equivalence Number (REN) for this equipment. You must provide
this information to the telephone company upon request.
The REN is useful to determine the quantity of devices you may connect to
the telephone line and still have all of those devices ring when your
number is called. In most, but not all areas, the sum of the REN of all
devices connected to one line should not exceed five (5.0). To be certain of
the number of devices you may connect to your line, as determined by the
REN, you should contact your local telephone company to determine the
maximum REN for your calling area.
If the modem causes harm to the telephone network, the telephone
company may discontinue your service temporarily. If possible, they will
notify you in advance. But if advance notice isn't practical, you will be
notified as soon as possible. You will be advised of your right to file a
complaint with the FCC.