MaxTech XT4862 - Manual (Page 4)

3
The monitor enters DPMS OFF mode when the computer turns off both the
Horizontal and Vertical Synchronization signals. This mode reduces the
monitor’s power consumption to 5W. When the synchronization signals
are re-enabled the monitor returns to normal operation.
Section 2 - Installation
2.1 Attaching the Base
• Carefully place the monitor on its
side or top.
• Insert the hooks on the swivel
base into the slots in the bottom
of the monitor. Push down and
forward on the base until it snaps
into place.
• Place the display upright in an
appropriate location.
2.2 Connecting the Cable
Expansion boards
COM1 COM2 LPT1 VIDEO
Figure 2-1 Monitor Connections
Figure 2-1 Connecting the
Base