Madrigal Imaging N38 - Manual (Page 8)

8
Operating Voltage
The Nº38 Preamplifier is set at the factory (internally) for 100V, 120V,
200V, 230V, 220V, or 240V AC mains operation @ 50 or 60Hz. (
230V/
50Hz only in European Union countries, in compliance with CE
regulations.) This voltage setting cannot be changed by the user.
Make sure that the label on the bottom panel of the Nº38 (adjacent to
the AC cord) indicates the correct AC operating voltage for your
location.
If the voltage indicated on your Nº38 is incorrect, or if you wish to
change the AC operating voltage of your Nº38 as the result of moving
to a different country than the one in which you purchased your
digital audio processor, see your Mark Levinson dealer.
The Nº38 can be powered by a normal 15-ampere AC mains line. If
other devices are also powered from the same AC line, their
additional power consumption should be taken into account.