Memorex MC4285 - Manual (Page 13)

12
DO NOT pick up the handset. Select the
number using the REVIEW (▼) ❶ or
(▲) ❷ button, then press the DIAL
button ❸; “PICKUP OR ADJ” will appear
in the display. If the number shown at the
bottom is exactly how it should be dialed,
simply pick up the phone and the number
will be dialed.
2
1
3
1
If you need to change the telephone
number (adding an area code or adding
a “1”), simply repeatedly press the DIAL
button until the correct telephone
number/area code appears in the
display, then pick up the handset.
2
TO AUTOMATICALLY DIAL A NUMBER IN THE CALLER ID DISPLAY
Note:
•
Once the unit’s memory is full, any new call forces the deletion of the earliest
call information.
TO DELETE 1 CALL/ALL CALLS
To Delete a Call: While the name and
number are displayed, press the
DELETE button ❶ once; “DELETE?”
will appear. Press the DELETE button
❶
again to delete the information.
To Delete All Calls: Press and hold
the DELETE button ❶ approximately 6
seconds, “DEL ALL CALLS?” will
appear. Press the DELETE button ❶
again to delete all past information.
Press the REVIEW (▲) ❷ button to
cancel.
2
1
TELEPHONE OPERATION (CONTINUED)
MC4285.O/M.QXD 1/3/02 1:36 PM Page 12