Bluetooth hands-free – Mazda 2007 CX-9 User Manual

Page 333

Advertising
background image

Black plate (333,1)

11. Say: [Beep]

“Yes” or “No”

12. If

“Yes”, go to Step 13.

If

“No”, the procedure returns to Step

8.

13. Prompt:

“Start pairing procedure on

phone. See phone's manual for
instructions.

14. Using the mobile telephone, perform

a search for the Bluetooth device
(Peripheral device).

NOTE

For the operation of the mobile telephone,
refer to its instruction manual.

15. Select

“Mazda” from the device list

searched by the mobile phone.

16. Input the 4-digit pairing code set in

Step 9 to the mobile telephone.

17. Prompt:

“Please say the name of the

phone after the beep.

18. Say: [Beep]

“XXXX - - -” (Call out a

“phone tag”, an arbitrary name for the
phone.)
Example:

“Stan's phone.”

NOTE

Call out a programmed

“phone tag” within 10

seconds.
If more than two mobile telephones are to be
programmed, they cannot be programmed with
the same or similar

“phone tag”.

19. Prompt:

“Adding XXXXXX - - -

(Ex.

“Mary's phone”) (Phone tag). Is

this correct?

20. Say: [Beep]

“Yes”

21. Prompt:

“Assign a priority for this

phone between 1 and 7, where 1 is
the phone used most often.

22. Say: [Beep]

“1” (Call out a number of

the desired priority from 1 to 7.)

NOTE

l

Normally,

“1” is to be input (Highest

priority).

l

If more than two mobile telephones are
registered, input the priority order from 1 to
7.

23. Prompt:

“XXXXXX - - - (Ex.

“Mary's phone”) (Phone tag) set to
priority X (Priority number). Is this
correct?

24. Say: [Beep]

“Yes”

25. Prompt:

“Pairing complete”

After a mobile telephone is registered, the
system automatically identifies the phone.
By pressing the phone button again, or by
pressing the phone button first after
turning the ignition switch from the
LOCK to the ACC position, the system
reads out a voice guidance

“XXXXXX - -

- (Ex.

“Mary's phone”) (Phone tag) is

connected

”. If two or more telephones are

registered, the one with the highest
priority is selected.

qMaking a call using a telephone

number

1. Press the phone button (Short press).

2. Say: [Beep]

“Dial”

3. Prompt:

“Number, please”

4. Say: [Beep]

“XXXXXXXXXXX (Ex.

“555-1234”) (Telephone number)”

5. Prompt:

“Dialing XXXXXXXXXXX

(Ex.

“555-1234”) (Telephone number)

is this correct?

6. Say: [Beep]

“Yes” or “No”.

Interior Comfort

Bluetooth Hands-Free

6-107

CX-9_8V83-EA-06I_Edition3 Page333
Monday, February 26 2007 7:20 PM

Form No.8V83-EA-06I

Advertising