Philips Magnavox 37MF321D User Manual

Page 32

Advertising
background image

32

HDMI (High Definition Multimedia Interface)

connectors

HDMI is the leading new standard for Digital video and audio

interconnection. With the

HDMI connector you can connect

HDMI Set-Top Box compatible DVD-R or DVD player with HDMI,

or DVI-equipped devices like a computer or other HDMI devices

to your TV. With this connection, you can display high-definition

pictures on this TV in digital format.

Note: If the accessory device has DVI output only, use a DVI to

HDMI adapter cable to connect to the

HDMI connector

Connect your HDMI device with

HDMI connector.

Select the connected digital device in the Setup, Source menu, p. 18

The HDMI IN connectors allow

- the following TV and monitor display modes:

SDTV 640/720 x 480i

EDTV 640/720 x 480p

HDTV 1920 x1080i/1280 x 720p

Notes:

- If necessary, you can adjust the picture position to the center of the

screen with the cursor keys.

- Due to legal requirements, it is possible that audio may be muted when

playing certain copy protected PCM audio from a device connected to

the HDMI input.

- Your TV supports HDCP (High-bandwidth Digital Content Protection).

This is a system for protecting DVD content outputted via DVI from

being copied. It provides a secure digital link between a video source

(DVD,PC,etc.) and your TV. Content is encrypted at the source device to

prevent unauthorized copies from being made.

- Proper working is only guaranteed with

HDMI

compliant consumer

products.

- Digital devices from different manufacturers may differing output stan

dards, which may prevent your television from properly displaying

output.

- If your TV does not detect a signal from your HDMI device, turn off

and then turn on the HDMI device. For optimal viewing, we suggest you

adjust your DVD player to one of the following TV display standards:

1920x1080i,1280x720p,720x480i or 720x480p.

Side connections

Camera, Camcorder, Game

Connect your camera, camcorder or game as shown.
Connect to VIDEO and AUDIO L for mono equipment.
For stereo equipment also connect AUDIO R . S-VHS quality

with an S-VHS camcorder is obtained by connecting the S-VHS
cables with the S-VIDEO input and AUDIO inputs .
Do not connect cable and at the same time. This may
cause picture distortion !

Headphone

Insert the plug into the headphone socket as shown.
Press the MUTE button on the remote control to switch off
the internal loudspeakers of the TV. The headphone impedance

must be between 8 and 4000 Ohm. The headphone socket has a
3.5 mm jack.
In the Sound menu select Headphone volume to adjust the head-

phone volume.

HDMI

HDMI

1

2

3

1
2

1
2

1
2

HDMI

DVI

Y

Pb

Pr

VIDEO

R

L

HDMI

AV1:

Analog Audio out

Advertising