Unlocking the radio from locked state, Bluetooth, Advanced features – Motorola XPR 7350 User Manual

Page 44

Advertising
background image

Advanced Features

English

34

Radio on page 5.
OR
If the password is incorrect:
You hear a continuous tone. Repeat Steps 1 to 3.
OR
After the third incorrect password, your radio enters into
locked state. A tone sounds and the LED double blinks
yellow.

Your radio enters into locked state for 15 minutes, and responds
to inputs from On/Off/Volume Control Knob.

NOTE: The radio is unable to receive any call, including

emergency calls, in locked state.

Unlocking the Radio from Locked State

Procedure:
Wait for 15 minutes. Repeat Steps 1 to 4 in Accessing the
Radio from Password
on page 33.
OR
Power up the radio, if you have powered down the radio during
locked state:

1

A tone sounds and the LED double blinks yellow.

2

Wait for 15 minutes. Repeat Steps 1 to 4 in Accessing the
Radio from Password
on page 33
.

Your radio restarts the 15 minutes timer for locked state when
you power up.

Bluetooth

This feature allows you to use your radio with a Bluetooth-
enabled device (accessory) via a Bluetooth connection. Your
radio supports both Motorola and COTS (Commercially
available Off-The-Shelf) Bluetooth-enabled devices.

Bluetooth operates within a range of 10 meters line of sight.
This is an unobstructed path between your radio and your
Bluetooth-enabled device.

It is not recommended that you leave your radio behind and
expect your Bluetooth-enabled device to work with a high
degree of reliability when they are separated.

At the fringe areas of reception, both voice and tone quality will
start to sound "garbled" or "broken". To correct this problem,
simply position your radio and Bluetooth-enabled device closer
to each other (within the 10-meter defined range) to re-establish
clear audio reception. Your radio’s Bluetooth function has a
maximum power of 2.5 mW (4 dBm) at the 10-meter range.

Your radio can support up to 3 simultaneous Bluetooth
connections with Bluetooth-enabled devices of unique types.
For example, a headset, a scanner, and a PTT-Only Device
(POD). Multiple connections with Bluetooth-enabled devices of
the same type are not supported.

Refer to your respective Bluetooth-enabled device’s user
manual for more details on your Bluetooth-enabled device’s full
capabilities.



Advertising
This manual is related to the following products: