Mustek VDC-300 - Manual (Page 22)

22
Software Installation
Windows 95/NT 4.0/98
Windows 98 User’s Note: For Plug n’ Play installation, please refer
to the following:
1. After connecting the camera to the PC using the USB cable, a
warning will appear.
2. Insert the Installation CD when prompted (asked for a driver),
and continue to follow all on-screen instructions.
2. Click on Start and select Run.
1. Insert the installation CD into
your CD-ROM drive.
3. In the Run dialog box,
type “drive:\run.exe”
where drive is your CD-
ROM drive and click
OK.
4. Click Install on the Tutorial screen and follow the on-screen
instructions.