Monarch Instrument ACT-1B-60 - Manual (Page 4)

1
SPECIFICATIONS
Range: 5 to 99,999 RPM
Accuracy: ±1 RPM or 0.005% of reading
Resolution: 1 RPM
Display: 5 digit, 0.56” (14 mm) high red LED
Display Update: Twice per second above 120 RPM
Dimensions: 1/8 DIN by 4.5” (114 mm) deep
Power Supply: Standard: 115 Vac or 230 Vac ± 10%, 50/60 Hz
(Specified when ordering)
Optional: 12 Vdc to 15 Vdc, 1.75 Watts
Inputs: Universal input for optical, proximity, two wire or
three wire magnetic, infrared or laser Sensors
TTL input or 1.5 Vac to 50 Vac input
Standard inputs are 1, 10 or 60 pulses per revolution
depending on the model. Contact factory to order
customized pulses per revolution.
Sensor Excitation: 8 Vdc at 5 mA for proximity sensors
5 Vdc at 75 mA for all other sensors
Recommended Sensors: Optical - Monarch ROS-5W
Proximity - Monarch P5-11
Magnetic - Monarch M-190W or MT-190W
Infrared
- Monarch IRS-5W
Laser - Monarch RLS-5W
IO Option: 4 to 20 mA, see page 7 for maximum load calculation
Full scale RPM settings as specified when ordered
12 bit resolution, 4096 steps over the range specified
AO Option: 0 to 5 Vdc, 5 mA maximum load
Full scale RPM settings as specified when ordered
12 bit resolution, 4096 steps over the range specified
PO Option: 0 to 5 V TTL pulse, non-inverting, one pulse out for each
pulse in
ACCESSORIES / SENSORS
ROS-5W: Remote Optical Sensor
T-5: Reflective Tape - 5 foot (1.5 m) roll, 0.5 inch (10 mm) wide
P5-11: Proximity Sensor
M-190W: Magnetic Sensor
MT-190W: Magnetic Sensor with Amplifier Module
IRS-5W: Infrared Sensor
RLS-5W: Laser Sensor
NOTE: Standard cable length is 8 feet (2.5 m) on all sensors. Longer
cable lengths of 15, 30, 50 or 100 feet ( 4.6, 9.2, 15 or 30.5 m)
are optional.
10