Memorex MKS8506 - Manual (Page 12)

11
To repeat a single track, press the
REPEAT button ❶ once; the
REPEAT indicator will blink.
Press the Skip/Search ( ) ❷ or
( ) button ❸ to select the
specific track that you wish to
repeat. When the desired track
number blinks in the display,
within five seconds, press the
PLAY/PAUSE (® ) button ❹ to
begin playback. The specific track
you selected will be repeated
continuously.
27
2
4
1
3
1
To cancel Repeat Playback,
press the REPEAT button ❶ until
the REPEAT indicator goes out.
You can also cancel Repeat
Playback by pressing the Stop
(■) button ❷.
27
2
1
3
To repeat all of the tracks on a
disc continuously, press the
REPEAT button ❶ twice; the
REPEAT indicator will light solid.
Press the Play/Pause (® )
button ❷ to repeat all tracks.
27
2
1
2
REPEAT PLAYBACK
Press the POWER button ❶ to
turn the unit on; the POWER
indicator will light. Rotate the
MONITOR switch ❷ to the CD
position.
27
2
1
1
Press the PROGRAM button; “0”
will blink in the display and the
PROGRAM indicator will blink.
27
3
Open the CD Compartment door
and insert your disc in the CD
player. Close the CD compart-
ment door. Wait for the CD player
to read the table of contents and
display the total number of tracks
on the disc.
2
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
OPERATION (CONTINUED)
CONTINUED ON THE NEXT PAGE