MITSUBISHI ELECTRIC XD480U - Manual (Page 16)

EN - 16
Menu operation
IMAGE
XGA60
opt.
INSTALLATION
opt.
XGA60
INSTALLATION
opt.
AUTO POWER
ON
AUTO POWER
OFF
OFF
OFF
XGA60
AUTO POWER
ON
AUTO POWER
OFF
OFF
OFF
AUTO POWER
ON
AUTO POWER
OFF
30 min
OFF
Basic operation
Several settings can be adjusted using the menu.
Example : Auto power off time setting
1. Press the MENU button.
2. Press the or button to select INSTALLATION.
3. Press the ENTER button (or button).
4. Press the or button to select AUTO POWER
OFF.
5. Press the or button to adjust the auto power
off time.
6. Exit the menu by pressing the MENU button sev-
eral times.
Important:
• When the button doesn't function, unplug the
power cord from the wall outlet. Wait about 10
minutes, plug the power cord in, and try again.
• After selecting the items marked with , press
the ENTER button.
IMAGE CONTRAST ±30
BRIGHTNESS
COLOR MATRIX
±30
sRGB ON, OFF
CineRichColor AUTO, 0 - 10
STANDARD
LOW
HIGH
USER
COLOR TEMP.
COLOR ±10
TINT ±10
SHARPNESS ±5
GAMMA MODE AUTO, DYNAMIC, STANDARD, THEATER
CONTRAST R ±30
CONTRAST B ±30
BRIGHTNESS R ±30
BRIGHTNESS B ±30
EXPAND MODE EXPAND, REAL
INSTALLATION
OFF, MIRROR, INVERT, MIRROR INVERT
AUTO POWER ON ON , OFF
RESET ALL OK
AUTO POWER OFF
ON , OFF
FEATURE MENU POSITION 1 (Upper left), 2(Lower right)
IMAGE REVERSE
SPLASH SCREEN
BLACK, IMAGE MUTE MODE
BLUE, BLACK, IMAGE BACK COLOR
STANDARD, LOW LAMP MODE
OFF, CENTER, UPPER, LOWER ANAMORPHIC
DISPLAY INPUT , MENU ACCESS , SPLASH ID SCREEN PASSWORD FUNCTION
ON , OFF SCART INPUT
VIDEO SIGNAL AUTO , NTSC , PAL , SECAM , 4.43NTSC , PAL-M , PAL-N , PAL-60
LANGUAGE , English, Español, Deutsch, Français, Italiano, , , ,
VIDEO
YELLOW ±30
RED ±30
BLUE ±30
CYAN ±30
GREEN ±30
MAGENTA ±30
RGB-TINT ±20
COMPUTER
USER
OFF
SIGNAL HORIZ.POSITION
HOLD
0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 31
TRACKING
USER
0 - 9999
CLAMP POSITION 0 - 63
CLAMP WIDTH 1 - 63
SHUTTER (L) 0 - 20
SHUTTER (U) 0 - 20
SHUTTER (RS) 0 - 20
SHUTTER (LS) 0 - 20
VERT. SYNC. AUTO, OFF
*5
*3 *8
*3 *8
*3 *8
*3 *8
*7
AUTO , OFF CINEMA MODE
*3
*3
*5
*5
ON BEGIN 0 - 15
END 0 - 15 OFF
COMPUTER INPUT RGB, YC B C R / YP B P R
*5
*5
OFF, 5, 10, 15, 30, 60 min
OK
ON
UNLOCK OK
LOCK
*1
*1
*1
*1
*2 *1
*1
*3
*6
*4
*2
*2 IMAGE CAPTURE
SETUP
x1, x2, FULL
GLAY, RED, GREEN, BLUE, BLACK, WHITE, RED 50%, GREEN 50%, BLUE 50%
CAPTURE
BACK COLOR
SIZE
GO
(Displayed only when the source is VIDEO or S-VIDEO.)
(Displayed only when the source is VIDEO or S-VIDEO.)
* 1: Not available when sRGB is set to ON.
* 2: Not available with certain signals.
* 3: Not available when the source is a VIDEO
or S-VIDEO signal.
* 4: Available only when the input signal is TV60, 480i.
* 5: Setting range differs depending on the input signals.
* 6: For XD480U / XD450U only.
* 7: Available only when the input signal is from the COMPUTER/
COMPONENT VIDEO IN-1.
* 8: Not available when the source is a DVI.
(These items are not available when the
input source is COMPUTER.)