Morphy Richards 8780 - Manual (Page 4)

Before first use
Carefully unpack the processor, checking
all parts against the illustrations. Remove any
stickers (except for the rating plate) and wash
all the parts which are safe to immerse in
water.
IMPORTANT: Never immerse the main
body in water or any other liquid
Operating controls
The speed control dial · has three
positions:
0 Off
1 Low speed
2 High speed
The pulse button fl allows greater control
over texture of the food produced. To operate
simply press the pulse button until the food
has reached the desired texture.
Setting up
1 Lower the processing bowl fi onto the
main body „ such that the three lugs
locate into the three slots, then rotate the
bowl clockwise until it locks into
position B.
2 Place the tool adaptor › over the central
column.
3 Fit the required tool, see following section.
4 Place the lid ‹ on the bowl by lowering
on with the safety catch just in front of the
main body, then twist clockwise to
lock C.
5 Plug into the mains supply.
6 Process the food by using the control dial
or pulse button.
Fitting and using
the tools
All tools are fitted within the processor
bowl and drop over the tool adaptor, locating
at the top or bottom.
Metal blade, plastic blade and
whisk
These three tools locate in the bottom
position on the tool adaptor.
1 Choose your tool and drop it over the tool
adaptor D.
2 Place the food into the bowl.
3 Replace the lid with the pusher ⁄ located
in the pusher tube ¤.
4 Process the food.
4
B C
8780 Food processor ib.QX4 28/4/04 4:53 pm Page 4