Magnadyne Keypad Keyless Entry System MKE-300 - Manual (Page 2)

Transmitter Button System Function
Locks the Vehicle's Doors and
Cargo Door
Unlocks the Vehicle's Doors
Locks the Cargo Door
Unlocks the Cargo Door
Turns On the Porch Light for
30 Seconds or Turns the Porch Light Off
Remark
Parking Lights Flash Once
1. Parking Lights Flash Twice
2. Dome Light Turns On for 30 Seconds
3. Porch Light Turns On for 30 Seconds
Note: If vehicle is operating from the RV
battery only, the parking lights will not flash.
Upon Vehicle's Door Unlock
Operation
A. 4-Button Transmitter Operation
+
Transmitter Button System Function
Locks the Vehicle's Doors and
Cargo Door
Unlocks the Vehicle's Doors
Turns On the Porch Light for
30 Seconds or Turns the Porch Light Off
Remark
Parking Lights Flash Once
1. Parking Lights Flash Twice
2. Dome Light Turns On for 30 Seconds
3. Porch Light Turns On for 30 Seconds
Note: If vehicle is operating from the RV
battery only, the parking lights will not flash.
Upon Vehicle's Door Unlock
B. 3-Button Transmitter Operation
System Function
Locks the Vehicle's Doors and
Cargo Door(s)
Unlocks the Vehicle's Doors
Locks or Unlocks the Cargo Door
(Operation is Sequential)
Turns On the Porch Light or Turns Off the
Porch Light (Operation is Sequential)
Activates the Channel 3 Output
Activates the Channel 4 Output
Activates the Channel 5 Output
Remark
Parking Lights Flash Once
1. Parking Lights Flash Twice
2. Dome Light Turns On for 30 Seconds
3. Porch Light Turns On for 30 Seconds
Note: If vehicle is operating from the RV
battery only, the parking lights will not flash.
Upon Vehicle's Door Unlock
C. Keypad Operation
Note: Turn the ignition switch to the "ON" position, or "LOCK" the vehicle's doors to turn off the dome light.
Keypad
Press the "LOCK" Key
Key in the "User
Code"
Press and Hold the
"1/2" Key for 3 Seconds
Press and Hold the
"3/4" Key for 3 Seconds
Key in the "User Code",
then Press and Hold
the "5/6" Key for 5
Seconds
Key in the "User Code",
then Press and Hold
the "7/8" Key for 5
Seconds
Key in the "User Code",
then Press and Hold
the "9/0" Key for 5
Seconds
© Copyright 2005 Magnadyne Corporation MKE-X-UM Rev. A 4-8-05