Muratec F-114 Series - Manual (Page 118)

F
AXING
6.17
6
5
Enter the number you want to store using the number
keypad and press Enter.
To insert a pause between numbers, press Redial/Pause.
A symbol “-” appears on the display.
6
To assign a name to the number, enter the name you want.
For details about entering characters, see page 1.32.
OR
If you do not want to assign a name, skip this step.
7
Press Enter when the name appears correctly or without
entering a name.
8
To store more fax numbers, repeat steps 4 through 7.
OR
To return to Standby mode, press Stop/Clear.
Sending a Fax using a Speed Number
1 Feed the document(s) face up into the ADF.
For details about loading a document, see page 6.5.
2
Adjust the document resolution to suit your fax needs. See
page 6.6.
If you need to change the darkness, see page 6.3.
3
Enter the speed dial number.
• For a one-digit speed dial number, press and hold the
appropriate digit button.
• For a two-digit speed dial number, press the first digit
button and hold the last digit button.
The corresponding entry’s name briefly displays.
4
The document scans into the memory.
The fax number stored in the speed dial location is
automatically dialed. The document is sent when the
remote fax machine answers.