Maytag MLI7500AAW - Manual (Page 9)

8
USING STEAM FEATURES
Steam
• Choose a
setting within
the steam range
on the
temperature control.
• Steam will help remove
stubborn wrinkles on
wool, cotton and linen
fabrics.
• To iron velvet, use
steam but do not let the
iron touch the fabric.
Burst of Steam
Be sure that the iron is operated
using the “linen /cotton” setting.
• Press the Burst of Steam button at
intervals of 2 - 5 seconds to apply powerful
shots of steam directly onto wrinkles.
• If the burst of steam button is pressed at
shorter intervals, hot water droplets may
be discharged.
• If shots of steam are not discharged during
initial usage, press the burst of steam
button several times.
• NEVER iron clothes while being worn.
• DO NOT use the burst of steam feature
with delicate fabrics.
• In the event that the steam / bursts of steam are not easily discharged due to insufficient
water within the tank, refill the tank with water up to the mark indicating “FULL”.
(
☞Refer to page 5.)
• If the bursts of steam decrease during usage, place the iron back on the cradle for reheating.
(If the burst of steam button has been operated more than 10 times consecutively, hot water
droplets may be discharged.)
• Do not place the iron on its side or upside down. This may cause water leakage and may
result in burns due to the escape of hot water.