Philips Magnavox VPA115AT - Manual (Page 22)

22 Specifications/Glossary
Antenna: VHF (very high frequency; channels 2 - 13) and UHF
(ultra high frequency; channels 14 - 69).
AUDIO OUTPUT Jack: jack located on the back of the VCP
which is used to send audio to another system.
Cable: all standard channels can be received without a Cable
Box.
Frame: a single still picture.
Remote Control: the small electronic unit that came with your
VCP; allows you to operate your VCP from a distance.
Special Effects: forward and reverse searching, viewing a still
picture.
VCP: video cassette player.
VIDEO OUTPUT Jack: jack located on the back of the VCP
which is used to send video to another system.
Glossary
Video Heads
Two heads
Video Signal
EIA standards; NTSC color
Antenna
VHF/UHF – 75 ohm external anten-
na/cable terminal
VHF Output Signal
Channel 3 or 4 (switchable)
75 ohms unbalanced
Power Requirement
AC 120V ± 10%, 60Hz ± 5%,
DC 13.2V ± 10%
Power Consumption
AC 12W
DC 12W
Operating Temperature
41°F (5°C) to 104°F (40°C)
Relative Humidity
10% to 80%
Weight
5.1 lbs. (2.3 kg.)
Dimensions
11”(W) x 3-5/8”(H) x 10-1/4”(D)
(280 mm x 92mm x 260mm)
NOTE: Designs and specifications are
subject to change without notice.
Specifications