Mercedes-Benz 2003 C 240 4MATIC - Manual (Page 289)

295
Practical hints
Replacing bulbs
Parking and standing lamp bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 234).
̈ Press the clamp and remove headlamp
cover 2.
̈ Pull out the bulb socket 6 with the
bulb.
̈ Pull the bulb out of the bulb socket.
̈ Insert a new bulb in the socket.
̈ Reinstall the bulb socket.
̈ Align headlamp cover 2 and click into
place.
Bi-Xenon* headlamps
1 Bulb socket for turn signal lamp
2 Headlamp cover for high beam bulb,
parking and standing lamp
3 Headlamp cover for Bi-Xenon lamp
4 High beam headlamp bulb
5 Bayonet socket for high beam head-
lamp bulb
6 Bulb socket for parking and standing
lamp
High beam bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 234).
̈ Press the clamp and remove headlamp
cover 2.
̈ Pull electrical connector 4 off.
Warning!
G
Do not remove the cover 3 for the Bi-Xenon
headlamp. Because of high voltage in
Bi-Xenon lamps, it is dangerous to replace
the bulb or repair the lamp and its compo-
nents. We recommend that you have such
work done by a qualified technician.
୴୴
S203 MY03_A.book Page 295 Tuesday, January 28, 2003 2:22 PM