Mercedes-Benz 2003 C 240 4MATIC - Manual (Page 193)

199
Controls in detail
Loading
Installing
̈ Fold split rear bench seat forward.
̈ Place twin-reel roller blind 1 into right
and left guide rails 2.
̈ Slide towards right to the end stop.
Split rear bench seat
The two sections can be folded down sep-
arately to enlarge the cargo compartment.
Folding the backrest forward
̈ Pull release handle 1.
̈ Fold seat cushion 2 forward.
Right hand side of rear seat
̈ Slip seat belt webbing behind
retainer 3.
̈ Retract head restraints fully and fold
rearward (
୴ page 35).
Warning!
G
When expanding the luggage compartment,
always fold the seat cushions fully forward
and always use the partition net when trans-
porting cargo.
Unless you are transporting cargo, the back-
rests must remain properly locked in the up-
right position.
In an accident, during hard braking or sud-
den maneuvers, loose items will be thrown
around inside the vehicle, and cause injury
to vehicle occupants unless the items are
securely fastened in the vehicle.
Always use the cargo tie down rings
(
୴ page 202).
S203 MY03_A.book Page 199 Tuesday, January 28, 2003 2:22 PM