Mercedes-Benz 2003 C 240 4MATIC - Manual (Page 63)

69
Safety and Security
Occupant safety
Installation of infant and child restraint
systems
Prior to installing a tether strap, note the
following steps:
̈ Roll up retractable luggage cover and
partition net.
̈ Fold backrest forward.
̈ Guide top tether strap between head
restraint and top of seat back.
Head restraints must be installed (if re-
movable) and positioned such that the
top tether strap can pass freely
between the head restraint and top of
the seat back.
Make sure that the tether strap is not
twisted.
̈ Fold backrest back until it locks in
place.
1 Anchorage ring
2 Hook
Anchorage rings 1 are located on the back
side of the outer rear backrests and on the
floor behind the rear center seat.
̈ Fold up anchorage ring 1.
̈ Securely fasten hook 2, which is part of
the tether strap, to anchorage ring 1.
i
If the top tether strap is to be installed
on the left back side of the rear back-
rest, you must first remove the
twin-reel roller blind (
୴ page 199).
The tether strap has to run through the
locking mechanism of the twin-reel
roller blind.
Warning!
G
Always lock backrest in its upright position
when rear seat bench is occupied by pas-
sengers, or the extended cargo area is not in
use. Check for secure locking by pushing
and pulling on the backrest.
i
For safety, please make sure that the
hook has attached to the ring beyond
the safety catch, as illustrated.
S203 MY03_A.book Page 69 Tuesday, January 28, 2003 2:22 PM