Motorola WPCI810GP - Manual (Page 27)

Configuration Section 3
WPCI810 3-11
Performance Enhancement
This feature applies only to the WPCI810GP Wireless PCI Adapter.
When enabled, the wireless data throughput of a WPCI810GP Wireless PCI Adapter is
boosted when used exclusively with Performance Enhanced base stations, such as the
WR850GP Wireless Router and/or WA840GP Wireless Access Point.
When the Performance Enhancement feature is enabled, the wireless network can still
support non-Performance Enhanced client devices, including standard 802.11g and/or
802.11b devices. Under these conditions the network steps down to support full backward
compatibility, but the WPCI810GP will still function normally.
1 Click Start, click Settings, and then click Control Panel.
2 Click System and select the Hardware tab.
3 Click Device Manager.
4 Click Network adapters.
5 Click Motorola Wireless PCI Adapter WPCI810 and select the Advanced tab.
6 To toggle the feature on or off, select Enabled or Disabled from the Value drop down
menu.
7 Click OK to save the changes and exit.