Memorex MD6800 - Manual (Page 9)

8
NOTES:
• This unit is capable of playing standard CDs or 3” singles; no adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will
show “no disc”.
• As each track is played, the track number and elapsed time are shown in the display.
• To remove the disc, open the CD Compartment, hold the edge of the CD and gently
press the center pivot and lift the CD.
• The maximum time of a CD is 74 minutes for this unit.
CD OPERATION (CONTINUED)
Insert a CD as described in the TO
INSERT A CD section.
1
Press the PLAY/PAUSE ( )
/POWER ON button to turn the unit on.
The Anti-Shock System will start
automatically and the display will show
the Anti-shock indicator (running man)
blinking rapidly to indicate the music is
being stored into memory. After 25
seconds, the Anti-shock indicator
(running man) will blink slowly to
indicate the unit is motion-proof.
2
MOTION PROOF ELECTRONIC ANTI-SHOCK SYSTEM
This CD player has a built-in Anti-Shock System that cuts down on CD skipping,
which is useful when using the CD player in the car or while jogging/walking.
Follow the steps below to activate and understand the Anti-Shock System:
To turn the Anti-Shock System off,
press the ESP button; the Anti-shock
indicator (running man) will disappear.
To turn the Anti-Shock System on,
press the ESP button again.
3
NOTES:
•
When the CD player is used in a
stable location, turn the Anti-Shock
System off by pressing the ESP
button. When the Anti-Shock System
is Off, battery consumption is less.
• The Anti-Shock System provides for
continuous sound output when unit
is subject to vibration, but it will not
correct errors, such as a defective or
dirty CD.
MD6800.O/M.QXD 3/1/02 8:47 AM Page 8