Emptying, cleaning, Conversion table, Helpline – Morphy Richards 7984 User Manual

Page 6: Chips, If filled with oil, If filled with fat

Advertising
background image

filled to the top of the basket.

Avoid leaving food to drain for too long in
the basket as the food may become soft
and lose its crunchiness.

Chips

Old potatoes are ideal for making chips.

Your chips should be evenly sized so that
they cook evenly. They should be rinsed in a
colander under a cold tap and dried using a
kitchen towel or absorbent paper. For best
results fry your chips at 160°C for 4-6
minutes and then place the basket on its
rest. Turn the temperature dial to 190°C and
when the temperature control light goes out
lower the basket again for a further 2-4
minutes. During this time, shake the basket
at short intervals to ensure the chips get an
overall browning.

For best results with frozen chips, we
recommend no more than 900g are being
used.

Emptying, cleaning

WARNING: Cleaning should only be

carried out when the fryer is switched
off and the plug removed from the
socket. The fryer should have
completely cooled. Allow two hours for
the oil to completely cool.

If filled with oil

1 Remove the lid, basket and control unit.
2 Remove the tank and pour out the oil

through fine muslin or absorbent paper
placed in a suitable funnel into a
container.

3 Wash the lid, basket and body by hand in

hot soapy water - do not wash in the
dishwasher.

4 Wash the tank by hand or in the

dishwasher.

5 Clean the control unit with a damp cloth

and/or paper tissue.
IMPORTANT: Never immerse the control

unit in water.

IMPORTANT: Ensure that the wires

connected to the heating element are not
damaged while cleaning.

6 Dry all parts of your fryer thoroughly and

replace the tank, control unit, basket and
lid. When replacing the tank, make sure
that it is in the correct way round with the
max/min lines to the left C.
You may store your filtered oil in the fryer

if you make sure that it is covered by the lid.

If filled with fat

1 Remove the frying basket when cooking

is completed and the fat is still melted
and wash it separately.

2 Remove the control unit when the fat has

cooled down but not solidified.

3 Allow to cool completely with the tank

still in position.

4 Remove the majority of the solid fat with

a plastic spatula or spoon.
Follow instructions 3-5 under ‘if filled with

oil’ to clean the other components.

Conversion table

The temperature control of your fryer is in

degrees C.

°C

°F

150

300

170

340

190

375

Helpline

If you have any difficulty with your

appliance, do not hesitate to call us. We’re
more likely able to help than the store from
where you bought it.

Please have the following information

ready to enable our staff to deal with your
query quickly:

Name of the product

Model number as shown on the
underside of the appliance.

6

7984 Pro Coolwall Fryer ib 26/9/03 3:40 pm Page 6

Advertising