Multiquip Portable Generator (Honda GX160 Gasoline Engine) GAC2.2H - Manual (Page 16)

page 16 — gac2.2H 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
general infOrMatiOn
gac2.2H FamiliaRizaTiON
generator
The Multiquip GAC2.2H generator has been designed as
a portable dual purpose power source for 60 Hz (single
phase) lighting facilities, power tools, submersible pumps
and other industrial and construction machinery.
This generator is mounted on rubber vibration isolators
that have a steel base backplate which is attached to the
protective steel pipe carrying frame. The protective carrying
frame is made of steel tubing and fully wraps around the
generators to protect against damage. See Figures 3, and
4 for the basic controls and indicators for the generator.
This portable generator is supplied with a electrical control
box. To reduce vibration caused by the engine, the control
box is also placed on rubber isolators.
control Box
The control box is provided with the following:
„ 120V GFCI receptacle.
„ 15 Amp Main Circuit Breaker.
„ AC Voltmeter
„ Ground Terminal
daNgeR
Before connecting this generator to any building’s
electrical system, a licensed electrician must install an
isolation (transfer) switch.
Serious injury or death may result without this transfer
switch.