Mr. Heater MH35LPTS - Manual (Page 6)

6 Mr. Heater | Gas-Fired Infra-Red Portable Construction Heater Operating Instructions and Owner’s Manual
Tip-Over Switch Arrangement
NOTE: The purpose of the tip-over Switch is to stop the flow of gas
when heater is accidentally knocked over. When and if the heater
is knocked over, simply stand heater up.
REPLACEMENT PARTS LIST
REF. # ....... ITEM# DESCRIPTION
1 .............. 00333 .......... CONT M-N SS PORT 3/8MPXI/4MP
2 .............. 02455 .......... BURNR/LTFR PORTABLES/D1096
3 .............. 05455 .......... ORIFICE/BURNER #55 DRILL
4 .............. 09352 .......... THERMOCOUPLE ASSY/18”
5 .............. 09357 .......... TIP-OVER SWITCH 6” LEAD(PORT)
6 .............. 09371 ......... JUNCTION BLK ADPTR KIT/TIPSW
7 .............. 11663 .......... REG L/P 27.5” W.C. OUT
8 .............. CR705 ......... IGNITOR, MODEL#35
9 .............. CR735 ......... PIEZO, MODEL#35
10 ............. 70724 ......... WHEEL, MODEL#35
11 ............. 70720 ......... HANDLE
12 ............. 70721 .......... HANDLE LOCKING KNOBS (2)
13 ............. 70723 ......... LOWER MAIN FRAME ASSEMBLY
Figure 4
Magnetic Portion
of Control
Tip Over
Switch
Thermocouple
Tip Over
Switch
Leads
Adaptor
Leads
Heater Bottom
Junction Block
Adaptor Kit
Control