Marshall electronic V-R231-IMD-HDSDI - Manual (Page 17)

18
On-Screen Menu (continued)
OSD CONFIGURATION SUBMENU (continued)
■ LED Tally
Use this setting to enable or disable the LED Tally. When enabled, the yellow, red and green LEDs above each display
will respond to tally commands, according to the Tally Source setting (see page 21).
■ Time Code
Use this setting to enable time code display on the screen. Time code is de-embedded from the vertical ancillary data
(VANC) within the SDI signal. Two types of time code can be selected to display on the screen: LTC (linear time
code) or VITC (vertical interval time code).
The position of the time code display varies based on the aspect ratio setting and presence of IMD text (see Aspect
Ratio diagrams on page 14).
■ Audio Monitor
Use the Audio Monitor menu option to enable or disable the audio presence indicator icon. When enabled, this icon
indicates whether embedded audio is present in the SDI video input. A red circle and cross will flash on the icon if no
embedded audio is present.
Embedded Audio Present No Embedded Audio
00:00:00:00
Time Code display
Hours Minutes Seconds Frames