Motorola T6200 - Manual (Page 42)

Privacy
40
QuieT6000™ (Continued)
If you have a T6200 radio with QuieT6000 on and want to talk to others in your
group who also have QuieT6000 on, you must first transmit a call tone before talking
to them. When the call tone is transmitted, ^ will display on the other T6200 or
T6300 series radios with the same channel, interference eliminator code, and
QuieT6000 on, letting them know that you want to talk to them. Those radios can
then receive and transmit until 30 seconds of inactivity occurs, which resets the
QuieT6000 function. While QuieT6000 is on, F is displayed to indicate that the
function is on. However, during the 30 seconds of inactivity, F will flash.
Unique Situations
QuieT6000 can also keep your radio quiet when you are in a situation where noise
can be disruptive, such as when you are in a movie theater or out hunting. Set
QuieT6000 to either 1 or 2 and set your radio’s alert to 1 (VibraCall only). Now
when you receive a call from another T6200 or T6300 series radio, your radio will
vibrate while the ^ displays on the screen. The ^ will remain on the screen until you
press any button. Only then can you receive and transmit to those radios until 30
seconds of inactivity occurs and the QuieT6000 function resets.
2 T6200 body.fm Page 40 Tuesday, February 20, 2001 3:36 PM