Murphy LCDT Selectronic Tattletale System LCDT-8535B - Manual (Page 2)

LCDT-8535B page 2 of 2
6-9/16 in.
(167 mm)
6-3/4 in.
(171 mm)
1-7/8 in.
(48 mm)
3-1/2 in.
(89 mm)
clearance for plug
3-1/8 in.
(79 mm)
6-1/16 in.
(154 mm)
3/16 in. (5 mm)
dia. 3 places
5-7/8 in.
(149 mm) 6-1/4 in.
(159 mm)
3-1/32 in.
(77 mm)
3-3/32 in.
(79 mm)
6-1/8 in.
(156 mm)
2-31/32 in.
(75 mm)
2-29/32 in.
(73 mm)
Module
Mounting
Hole
8 in.
(203 mm)
4-1/2 in.
(114 mm)
4-3/16 in.
(106 mm)
14 in. (356 mm)
clearance for conduit
9 in.
(229 mm)
3-1/4 in.
(83 mm)
10-1/4 in.
(260 mm)
5-15/16 in.
(151 mm)
10-5/8 in.
(270 mm)
8-5/8 in.
(219 mm)
15 in. (381 mm)
clearance for conduit
4-1/2 in.
(114 mm)
9 in.
(229 mm)
LCDT-PS-120/24/12
LCDT
How to Order
To order complete LCDT system, specify each component as follows:
(1) LCDT Module: Specify LCDT-
-NO: For normally open applications
-NC: For normally closed applications
(2) Terminal Strip and Cable Assembly: Specify LCDT-
-50CA-36: Normally open
-100CA-36: Normally closed
(3) Power Supply: Specify LCDT-
-PS-CD (R)-P: CD ignition positive ground
-PS-CD-N: CD one or two ignitions negative ground
-PS-120/24/12: Voltage: 120 AC, 12/24 DC
Shipping Dimensions:
LCDT-NO/NC module: 8- 1 /
2
x 9- 1 /
2
x 5- 1 /
2
in. (216 x 241 x 140 mm).
LCDT-PS-CD-N and LCDT-PS-CD (R)-P: 4- 1 / 2 x 15- 1 / 2 x 5- 1 / 2 in.
(114 x 394 x 140 mm).
LCDT-PS-120/24/12: 11- 1 / 2 x 18- 1 / 4 x 13- 1 / 2 in. (291 x 464 x
343 mm).
LCDT-50CA-36 or 100CA-36: 7- 1 /
4
x 12 x 5- 1 /
2
in.
(184 x 305 x 140 mm).
Shipping Weights:
LCDT-NO/NC Head: 5 lb. (2.2 kg.).
LCDT-PS-CD (R)-P: 9 lb. (4.08 kg.).
LCDT-PS-120/24/12: 21 lb. (9.5 kg.).
LCDT-50CA-36 or 100CA-36: 3 lb. (1.3 kg.).
LCDT System
The basic LCDT system consists of (1) the LCDT module,
(2) the terminal strip and cable assembly, and (3) the power supply.
LCDT Module–described on front page.
Terminal Strip and Cable Assembly
The plug-in type Terminal Strip has 50 screw-type connections for
normally open sensors and 100 connections for normally closed
sensors. The terminal strip can be connected to the LCDT module
with the 36 in. (914 mm) long flat ribbon cable.
Power Supply
You have a choice of input power supplies: LCDT-PS-CD (R)-P
and LCDT-PS-CD-N for CD ignition or LCDT-PS-120/24/12 for
120 VAC or 12 or 24 VDC. Each power supply includes control
Inputs/Outputs and an intrinsically safe barrier. They were
designed for Class I, Divisions 1 and 2, Group D Hazardous
Locations. FM and CSA listed.
LCDT-PS-CD (R)-P
LCDT-PS-CD -N
LCDT
Module
Power Supplies
Dimensions
Warranty
A limited warranty on materials and workmanship is given with this FW
Murphy product. A copy of the warranty may be viewed or printed by going to
www.fwmurphy.com/support/warranty.htm
Printed in U.S.A. 04 7 554
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our
specifications and designs at any time. MURPHY, the Murphy logo, and Selectronic
® Tattletale ® . are registered
and/or common law trademarks of Murphy Industries, Inc. This document, including textual matter and
illustrations, is copyright protected by Murphy Industries, Inc., with all rights reserved. (c) 2006 Murphy
Industries, Inc. www.fwmurphy.com
918.317.4100 Email: [email protected]