Motorola QIP27xx - Manual (Page 22)

16
Connecting an A/V Receiver — Audio Only
There are three options available for audio connections to your A/V
receiver:
• Optical
(
OPTICAL SPDIF
)
• Coaxial
( SPDIF )
• Stereo
audio ( AUDIO R and L )
If your equipment supports it, the optical ( OPTICAL SPDIF connector) or
coaxial (
SPDIF
connector) audio outputs may be used in place of the
stereo audio outputs (
AUDIO R
and L). In most cases, these outputs offer
a higher level of audio quality, including support for Dolby Digital 5.1
surround sound.
•
Optical SPDIF: Connect the optical SPDIF cable to the
OPTICAL
SPDIF
connector on the set-top and to the
OPTICAL
connector on the
A/V receiver.
•
SPDIF (coaxial): Connect the digital audio cable to the SPDIF
connector on the set-top and to the
DIGITAL INPUT COAX
connector
on the A/V receiver.
•
Stereo audio: Connect the stereo audio cable to the AUDIO R and L
connectors on the set-top and to the
AUDIO LEFT
and
AUDIO RIGHT
connectors on the A/V receiver.