Muratec MFX-1950 - Manual (Page 50)

2-12 G
ettInG started
Paper handling
Acceptable paper sizes
Paper cassette
Paper type Paper size Quantity
Plain paper
(weight: 20–24 lbs.)
Letter, Legal, Half-letter 500 sheets
(weight: 20 lbs.)
Bypass tray
Paper type Paper size Quantity
Plain paper
(weight: 20–24 lbs.)
Letter, Legal, Half-letter , Executive
A4, A5, A5 , A6, F4,
50 sheets
(weight: 20 lbs.)
Custom sizes
• Width: 3.8 to 8.5 in. (97 to 216 mm)
• Length: 5.5 to 14 in. (140 to 356 mm)
1 sheet
Envelopes DL: 4.33 × 8.66 in. (110 × 220 mm)
Com#10: 4.125 × 9.5 in. (105 × 241 mm)
Monarch: 3.875 × 7.5 in. (98.4 × 190.5 mm)
1 envelope
Postcard 3.94 × 5.83 in. (100 × 148 mm) 20 sheets
Transparency Letter 20 sheets
• Custom-sized paper can be used for PC printing only.
• A5-sized paper cannot use for PC printing, but A5 is available.
• Do not use envelopes with double flaps or pressure seals since these do not feed properly.
• If using a transparency (OHP) film, be sure that the film does not have a paper back-
ing and/or a leading strip. If it does, remove the paper backing and/or strip before
loading. Only the film should go in, not film with any backing or strip.
Duplex printing
For the MFX-1950, the duplex printing is available and only the following paper sizes
can be used for duplex printing.
Paper type Paper size
Plain paper
(weight: 20–24 lbs.)
Letter, Legal, A4, F4
Paper to avoid:
To prevent jams and damage to your machine, do not use the following:
• Creased paper
• Very thick paper
• Wrinkled paper • Paper previously printed on by a printer
• Folded paper • Paper with holes
• Curled paper • Envelopes with pressure seals
• Torn paper • Extremely shiny or highly textured paper
• Carbon paper • Art paper, coated paper, coated paper for inkjet printers
• Moist paper • Paper printed on a thermal printer or an inkjet printer
• Very thin paper