Real-time transmission (non memory transmission), And 4-6.) – Muratec MFX-1950 User Manual

Page 72

Advertising
background image

4-6

s

endInG

faxes

Real-time transmission (non memory transmission)

Your machine will simply dial the other fax and when it makes contact, your machine

will feed the document through, scanning and transmitting real time
• With real time transmission, you can watch each page as it is scanned and sent.
To perform a real time transmission:

1

Switch to the fax mode by pressing <

copy

4

fax

4

scan

>.

2

Place the document on the ADF.

NOTE: • The document glass cannot be used for real time transmission.

• The document glass is available only for the MFX-1950.

3

Obtain a dial tone, either by:
• Pressing <Advanced Functions> repeatedly until “Monitor” appears, and then

press <Enter>.

– or –
Pressing the “Monitor” soft key
–or–
• Lift the handset if you have connected an external telephone to your machine.

In either case, the machine shows:

** Tel Mode **

_

– or –
Press <Advanced Functions> repeatedly until “Memory Tx” appears and press

<Enter>. Then select “Off” and press <Enter> to turn off the memory transmission.

– or –

If you assigned “Memory Tx” to a soft key (page 8-2), turn off the memory transmission
by simply pressing that key.

NOTE: “Monitor” is a default soft key on the F-315.

4

Dial the fax number.
• Use the numeric keys to dial the number.
–or–
• Press a one-touch key. (See page 3-6.)
–or–
• Press <Speed Dial /Group> and three-digit code. (See page 3-8.)
–or–
• Use the phone directory dialing. (See page 3-11.)

NOTE: With real time transmission, only one destination can be dialed.

5

When you hear fax tones from the remote unit, press <Start>.

If a person answers the phone, use the handset to tell that person that you are trying

to send a fax. When you hear fax tones, press <Start>.

If the call fails and you used “Monitor” to dial, press <Advanced Functions> repeatedly

until “Monitor” appears, then press <Enter> or press the “Monitor” soft key to hang up.

If you are using the handset, hang up after pressing <Start>.

NOTE: To cancel the transmission, use Review commands features. (See page 4-8.)

Advertising
This manual is related to the following products: