Miele G 5975 - Manual (Page 15)

The water hardness was programmed
at 1 °d (1 gr/gal) by factory default.
^ Select the hardness of your water
supply and confirm with the center
button.
See "Settings - Water hardness" for
more information.
Two notes appear in the display.
After confirming these notes, : Add
rinse aid and/or : Add salt may
appear in the display.
Confirm these notes with OK. The
display changes to the main menu.
These basic settings are saved after
the first full program cycle is
completed.
Before using for the first time
15