Morphy Richards Intellichef - Manual (Page 3)

3
Please also refer to the main
instruction booklet, which contains
important safety information and
more detail on how to use intellichef.
Remove accessories from inside intellichef.
Plug in intellichef. The power socket inlet is
located at the rear on the right hand side.
The clock will illuminate and the red light on
the START button will flash. This indicates
standby mode.
1
Adjust the clock to the correct time by
holding down the HOUR or MINUTE button
for 3 seconds. A bleep will sound and the
display will flash. Adjust using the HOUR
and MINUTE buttons. Once set, the display
will continue to flash, but will stop after 10
seconds.
2
Press the lid release button.
Prepare your ingredients and place inside
intellichef.
3
Easy set-up guide
Cut
and
keep
OFF/ KEEP WARM: A dual off and keep
warm switch.
MENU: Press to select cooking program, eg.
RICE/PASTA, BOIL, STEAM etc.
DELAY TIMER: Press to set the delay timer.
HOUR: Press to adjust cook time or the
clock in hours.
MINUTE: Press to adjust cook time or the
clock in minutes.
COOK TIME: Press to adjust cooking time
before pressing the HOUR or MINUTE
button. For certain programs only.
FOOD SELECTION: For the STEAM and
FRY programs only. This option gives helpful
pre-set cook times for Vegetables, Fish or
Meat.
Explanation of buttons
FFoorr ddeettaaiillss ooff ootthheerr M Moorrpphhyy RRiicchhaarrddss pprroodduuccttss,, pplleeaassee sseeee oouurr w weebbssiittee::
Before using for the first time, wash all parts, except the main unit.
48810 Rev1 22/10/08 13:08 Page 3