Morphy Richards ELITE 42288 - Manual (Page 7)

88 88
C C
4 Depress the steam button ⁄ ⁄ for
1 minute to clear the system of
air (first time use only) which will
be accompanied by a clicking
noise which is quite normal.
5 Begin first time ironing with an
old towel. Note: If you press the
steam button before the steam
generator reaches its required
temperature a warning double
bleep will sound.
6 The appliance is ready to use.
7 Press the steam button ⁄ ⁄ for
steam ironing.
8 Depress the power switch to
turn off the base unit when
ironing is complete.
Dry ironing
1 Connect the appliance to a
suitable mains outlet.
2 42288 Only. Press the steam
switch О
О 2 times until all three
steam level indicator lights go
off (steam off mode).
3 Turn the temperature dial on the
iron in a clockwise direction,
select dot-1, dot-2, or dot-3
according to the
recommendation of the garment
label.
4 The temperature indicator light
glows on the iron indicating that
it is switched on.
5 When the required temperature
is reached, the temperature
indicator light on the iron goes
off. The iron is ready to use.
It is always a good idea to begin
with ‘cool’ fabrics and work up
to higher settings.
An iron heats up quicker than it
cools down so you’ll save time
and electricity.
Auto-shut off. (42288
only)
An auto-shut off system will
activate if the steam is not used
for over 15 minutes. The mains
indicator light Б
Б will flash
between green and red
indicating the unit is in ‘sleep
mode’.
When this occurs, press the
steam select button О
О or the
power switch Б Б ‘ON’ once. The
appliance will switch on
immediately and you need to
check, and select the required
setting.
ANTI-SCALE
SYSTEM
The anti-scale cartridge is
designed to reduce the build-up
of limescale which occurs
during steam ironing, this will
prolong the working life of your
iron. However, please note that
the anti-scale cartridge will not
completely stop the natural
process of limescale build-up.
When the cartridge needs
replacing the indicator light В
В
will flash.
NOTE: The unit will not switch
off. But you need to replace the
cartridge as soon as possible.
Replacing anti-scale
medium
C C
1 When the indicator light flashes
you need to replace the anti-
scale cartridge.
2 The steam generator needs to
be connected to the mains
supply.
3 Remove the tank from the base
unit.
4 Remove the anti-scale cartridge
which is situated behind the
tank, and replace the cartridge
making sure the replacement
unit is pushed firmly in position.
5 Re-position the tank.
6 If the cartridge is not fitted
correctly the unit will not
Cartridge
Drawer
42288 rev1 30/11/06 14:34 Page 8