Iii. safety decal information, Iv. warnings - do’s, Warning • danger – Mantis CULTIVATOR 401764 XP User Manual

Page 4

Advertising
background image

DON’T FUEL, REFUEL, OR
CHECK FUEL WHILE
SMOKING, OR NEAR AN
OPEN FLAME OR OTHER
IGNITION SOURCE.

INCORRECT ASSEMBLY.

CAUTION: WHEN
ASSEMBLING THE HANDLES,
MAKE SURE FUEL TANK FACES
AWAY FROM OPERATOR. THIS
IS THE REAR OF THE TILLER,
REFER TO ASSEMBLY
INSTRUCTION ON PAGE 7.

CUTTING HAZARD; KEEP
FEET AND HANDS AWAY
FROM ROTATING TINES.

WEAR EAR AND EYE
PROTECTION.

DO NOT OPERATE TILLER
INDOORS OR IN POORLY
VENTILATED AREA

DO NOT REACH YOUR
FINGERS AND\OR
HANDS IN BETWEEN
THE TINE BLADES

ALWAYS REMOVE THE
OUTER TINES BEFORE
REMOVING THE
INNER TINES

READ OWNER’S MANUAL
BEFORE USING TILLER, OR
PERFORMING ANY REPAIR
OR MAINTENANCE. KEEP
OWNERS MANUAL IN A
SAFE PLACE.

DO NOT CARRY THE TILLER
IN THIS POSITION.

WARNING • DANGER

IF THE TILLER IS USED IMPROPERLY OR SAFETY PRECAUTIONS

ARE NOT FOLLOWED, THE USERS RISK SERIOUS INJURY TO

THEMSELVES AND OTHERS. READ AND UNDERSTAND THIS

MANUAL BEFORE ATTEMPTING TO OPERATE THIS TILLER.

!

!

WARNING • DANGER

OPERATION OF THIS EQUIPMENT MAY CREATE SPARKS THAT

CAN START FIRES AROUND DRY VEGETATION. A SPARK

ARRESTOR IS INSTALLED. THE OPERATOR SHOULD CONTACT

LOCAL FIRE AGENCIES FOR LAWS OR REGULATIONS

RELATING TO FIRE PREVENTION REQUIREMENTS.

!

!

An important part of the safety system incorporated in this tiller

are the warning and information decals found on various parts of the

tiller. These decals must be replaced in time due to abrasion, etc. It is your

responsibility to replace these decals when they become hard to read. The

location and part numbers (P/N) of these decals are illustrated below.

III. Safety Decal Information

4

P/N 400634

P/N 400631

P/N 400635

IV. Warnings - Do’s

Read and understand the owner’s

manual. Pay particular attention to all
sections regarding safety.

1. Always keep a firm grip on both

handles while the tines are moving and/or
the engine is running. BE AWARE!! The
tines may coast after throttle trigger is
released. Make sure tines have come to a
complete stop and engine is off before
letting go of the tiller.

2. Always maintain a firm footing and

good balance. Do not overreach while
operating the tiller. Before you start to use
the tiller, check the work area for obstacles
that might cause you to lose your footing,
balance or control of the machine.

3. Thoroughly inspect the area where

equipment is to be used and remove all
objects, which can be thrown by the
machine.

4. Always keep area clear of children,

pets, and bystanders.

5. Always stay alert. Watch what you

are doing and use common sense. Do not

operate unit when fatigued.

6. Always dress properly. Do not wear

loose clothing or jewelry, they might get
caught in moving parts. Use sturdy gloves.
Gloves reduce the transmission of
vibration to your hands. Prolonged
exposure to vibration can cause numbness
and other ailments.

7. While working, always wear

substantial footwear and long trousers. Do
not operate the equipment when barefoot
or wearing open sandals.

8. Always wear ear and eye protection.

Eye protection must meet ANSI Z 87.1.
To avoid hearing damage, we recommend
hearing protection be worn whenever
using the equipment.

9. To reduce fire hazard, keep the

engine, and petrol/gas storage area free of
vegetative material and excessive grease.

10. Start the engine carefully,

according to the manufacturer’s
instructions and with feet well away from
tool(s).

11. Keep all nuts, bolts and screws

tight to be sure the equipment is in safe

working condition.

12. Use extreme caution when

reversing or pulling the machine towards
you.

13. Work only in daylight or good

artificial light.

14. Always be sure of your footing on

slopes.

15. Exercise extreme caution when

changing direction on slopes.

16. Always keep a safe distance

between two or more people when
working together.

17. Always inspect your unit before

each use and ensure that all handles,
guards and fasteners are secure, operating,
and in place.

18. Always maintain and examine your

tiller with care. Follow maintenance
instructions given in manual.

19. Always store tiller in a sheltered

area (a dry place), not accessible to
children. The tiller as well as fuel should
not be stored in a house

.

20. Always remove the outer set of tines
before removing the inner set of tines.

401764 XP Tiller-Cultivator_manual 5/18/10 10:51 AM Page 4

Advertising