Maretron SIM100 - Manual (Page 6)

SIM100 User's Manual
Page 2 Revision 1.0
1.3 SIM100 Accessories
Maretron offers the following accessories for the SIM100:
• SH-499CSTE Smoke/Heat Detector
• CO1000-S-W Carbon Monoxide (CO) Detector (Surface Mount White)
• LP1000-S-W Liquid Petroleum (LP) Detector (Surface Mount White)
• BHW100 Bilge High Water Detector
• MD-6157-N Motion Detector
• MS-1035 Magnetic Switch Rectangular (Indoor)
• MS-1085-N Magnetic Switch Rectangular (Outdoor)
• MS-1055-N Magnetic Switch Cylinder (Indoor/Outdoor)
• MS-1075 Magnetic Switch Recessed (Indoor/Outdoor)
1.4 Quick Install
Installing the Maretron SIM100 involves the following five steps. Please refer to the individual
sections for additional details.
1. Unpack the box (Section 2.1)
2. Choose a mounting location (Section 2.2)
3. Mount the SIM100 (Section 2.3)
4. Connect the SIM100 (Section 0)
5. Configure the SIM100 (Section 2.5)
2 Installation
2.1 Unpacking the Box
When unpacking the box containing the Maretron SIM100, you should find the following items:
1 – SIM100 – Switch Indicator Module
1 – Parts Bag containing 4 Stainless Steel Mounting Screws
1 – SIM100 User’s Manual
1 – Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
2.2 Choosing a Mounting Location
Please consider the following when choosing a mounting location.
1. The SIM100 is waterproof, so it can be mounted in a damp or dry location.
2. The orientation is not important, so the SIM100 can be mounted on a horizontal deck,
vertical bulkhead, or upside down if desired.
3. The SIM100 is temperature-rated to 55°C (130°F), so it should be mounted away from
engines or engine rooms where the operating temperature exceeds the specified limit.