Change code (6-2), Fixed dial (6-3) – Motorola C200 User Manual
Page 74
74 - Menus
Select
2Q
or
2II
. When changing the phone code status, you must
enter your phone code. (The default phone code is 1234.)
Change Code (6-2)
PIN Code (6-2-1)
You can change your PIN. You need to activate your PIN as
described in 6-1-1 before changing your PIN. First, enter the
original PIN and press
$
(
2.
) or
)
. Then enter the new
PIN and press
$
(
2.
) or
)
. Enter the new PIN again and
press
$
(
2.
) or
)
to confirm.
PIN2 Code (6-2-2)
You can change PIN 2 code the same way you change your PIN.
Note: When you enter a wrong PIN2 code three times in a row, you
need to enter the PUK2 code to unblock PIN2, if so provided by
your service provider.
Phone Code (6-2-3)
You can change your phone code in the same way you change
your PIN.
Network Code (6-2-4)
You can change the network password in the same way you
change your PIN.
Fixed Dial (6-3)
You can set limitations on the numbers you can call.
Note: You must get PIN2 before you can use this feature.
Note: If you enter a wrong PIN2 code three times in a row, you
need to enter the PUK2 code to unblock PIN2, if so provided by
your service provider.
C200.book Page 74 Wednesday, August 27, 2003 4:50 PM