After use safety and maintenance, Care and maintenance, Caution – Master Cookware 3405GT User Manual

Page 25

Advertising
background image

Burner

Holes in Burner

YELLOW

BLUE

BAD FLAME

GOOD FLAME

FLAME CHECK

25

Care and Maintenance

burner. Try cleaning the burner surface and the

holes to improve the flames. Bad flames may also be caused by poor HVR-to-venturi
attachment. Always let the smoker cool before cleaning or checking the assembly.

To protect your smoker from weather, always keep your smoker covered while
not in use.

To obtain replacement parts or accessories, call our toll-free customer
service line:

: All care and maintenance procedures are to be performed only while the smoker is turned off and cooled.

Clean the water bowl and cooking grids with hot, soapy water. Rinse and dry thoroughly. You may prefer to coat the water bowl and cooking grids
lightly with cooking oil or cooking spray.

Frequently check and clean the venturi and burner for insects and insect nests. A clogged tube can lead to fire outside the smoker. Also make sure
the smoker does not have any foreign objects obstructing the flow of combustion and ventilation air.

To clean the inside and outside of the smoker cabinet, simply use a damp cloth. Spray-washing with a water hose is not recommended. All
moisture should be wiped away and not allowed to stand inside or on top of the smoker. Carefully remove the grease pan, dispose the grease, and
wash thoroughly. Once cleaned, you may prefer to lightly coat the interior of the smoker cabinet with cooking oil or cooking spray.

If rust is present on the exterior surface of the smoker, clean the area with steel wool or emery cloth and use heavy duty, heat resistant paint.

NEVER apply additional paint to the interior of the smoker. If rust is present on the interior of the smoker, clean it thoroughly with steel wool or
emery cloth and lightly coat the area with cooking oil or cooking spray to help minimize recurring rust.

When an LP tank is not connected, and to help prevent dirt or other foreign particles from clogging
the HVR, hang the end of the HVR hose from the side handle using the supplied S-hook.

Inspect the flames at the burner by looking through the front access hole. A good flame should
be blue with a yellow tip 1” to 2” in length. If flames are excessively yellow and irregular, oil residue
and food deposits may be collecting on the

If your heat indicator seems to be out of calibration: Remove the heat indicator from the door of the smoker by loosening and removing the
mounting nut from the inside. There is a second nut mounted on the back of the heat indicator that can be turned to adjust the heat indicator
needle. Set the needle to the current outdoor ambient temperature and re-mount the heat indicator to the door of the smoker.

1-800-944-8982

Use caution when lifting and moving the smoker to avoid strains or back injury. 2 people are recommended to lift or

DO NOT store the smoker near gasoline or other combustible liquids or where combustible vapors may be present.

DO NOT store this smoker in an area accessible to children or pets. Store the smoker in a dry, protected location.

DO NOT allow anyone to conduct activities around the smoker following use until it has cooled. It is hot during operation

DO NOT leave hot ashes unattended until the smoker cools completely.

This smoker becomes extremely hot - allow the smoker to cool completely before handling. If you must handle the

Dispose of cold ashes by wrapping them in heavy duty aluminum foil and putting them in a noncombustible container. Be
sure there are no other combustible materials in or near the container.

If you must dispose of the ashes in less time than it takes for them to completely cool, remove the ashes from the smoker,
keeping them in heavy duty foil, and soak them completely with water before disposing of them in a noncombustible
container.

move

the smoker.

Keep

the area around the smoker clear and free of combustible materials and vapors.

and remains hot for a period of time following use.

smoker

while it is hot, ALWAYS wear protective oven mitts or heat resistant gloves when handling the smoker or its components.
Allow the smoker to cool before removing and cleaning the grease pan.

After Use Safety and Maintenance

CAUTION

Advertising
This manual is related to the following products: