MicroBoards Technology QD-DVD - Manual (Page 19)

19
Specifications
• Product Name Quic Disc QD-DVD
• Product Interface ATAPI/ IDE
• Max Read Speeds: CD 52X, DVD 16X
• Max Write Speeds: CD 40X, DVD 16X
• System Display LED
• Write Method Auto Detect (DAO, TAO )
• Operation Mode COPY, TEST,
PRESCAN
• Data Buffer 1 MB
• Firmware Upgrade Via CD-ROM
• Dimension 6.8 x 7.5 x 11.25 (H x W x D)
• Weight 4.8 kg (10.7 lbs)
• Power Supply: 100-240V~; 2A MAX;
50/60Hz
• Certification CE, FCC
• Recommended Media: Taiyo Yuden
• Supported Formats: CD-ROM Mode 1 & 2 CD-DA, CD-ROM/XA Video CD, Game CD, Mix Mode,
Multisession, HFS CD Bridge, Photo CD, CD Extra; DVD-ROM, DVD-+R,
DVD-+RW, DVD-+R DL, DVD-VIDEO
CAUTION:
Disconnect AC Power Cord Before Servicing. High Voltages Present with Unit Powered Off and
Line Cord Connected.
Technical Support
For technical questions or support issues, contact Microboards Technology technical support:
United States
PH: 952-556-1639
FAX: 952-556-1628
[email protected]
www.microboards.com
Europe
PH: +44 (0) 845 230 7800
www.microboards.co.uk
Japan
PH: 03-3561-2266
www.microboards.co.jp
Please have the Model and Serial Number of your QD-DVD available when contacting
Technical Support.
Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s
authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.
This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following
European standards: EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE Marking
Directive 93/68/EEC.
Canadian Department of Communications (DOC) Statement
This Class A digital apparatus complies with the Canadian ICES-003 Issue 4:2004. Cet appareil numerique de la classe A est
conforme a la norme NMB-003 du Canade.