Installation instructions, Before using your wine cooler, Installing your wine cooler – Magic Chef MCWC45A User Manual

Page 4: Important safety instructions

Advertising
background image

IMPORTANT SAFETY INSTRUCTIONS

a

WARNING

a


To reduce the risk of fire, electrical shock,
or injury when using your appliance, follow
these basic precautions:


Read all instructions before using the wine cooler.
DANGER or WARNING: Risk of child entrapment.
To avoid the possibility of child entrapment, please take the following precautions
before throwing out the wine cooler.

-

Remove all doors from the unit.

-

Leave the shelves in place so that children may not easily climb inside.

Never allow children to operate, play with, or crawl inside the wine cooler.
Refrigerants: All refrigeration products contain refrigerants, which under the
guidelines of federal law must be removed before disposal of product. It is the
consumer’s responsibility to comply with federal and local regulations when
disposing of this product.
Never clean wine cooler parts with flammable fluids. The fumes can create a fire
hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or an explosion.

-Save these instructions-

INSTALLATION INSTRUCTIONS

Before Using Your Wine Cooler

• Remove the exterior and interior packing.
• Before connecting the wine cooler to the power source, let it stand upright for approximately 4

hours. This will reduce the possibility of a malfunction in the cooling system from improper
handling during transportation.

• Clean the interior surface with lukewarm water using a soft cloth. (Cleaning instruction on page 7)

Installing Your Wine Cooler

• This wine cooler is designed to be free standing only, and should not be recessed or built-in.
• Allow 5 inches of space between the back and sides of the wine cooler, which allows the proper

air ventilation. Adjust the feet to keep the wine cooler level.

• Locate the wine cooler away from direct sunlight and sources of heat (stove, heater, radiator,

etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Ambient temperature below 55°F (12.8°C) or above 77°F (25°C) will hinder the
performance of this appliance. This unit is not designed for use in a garage or any other
outside installation.

• Avoid locating the wine cooler in moist areas.
• Plug the wine cooler into dedicated, properly installed-grounded wall outlet. Do not under any

circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized service center. This unit is not designed to be installed in an RV or used with an
inverter.

• After plugging the wine cooler into a wall outlet, turn the unit on and allow the unit to cool down for

3 ~ 4 hours under before placing wine bottles or beverages in the appliance.

EN

3

Advertising